LawnMaster NPTGCP2617A, Руководство оператора, Страница: 15 / 79

CHARGER LEDS
■ If the battery is not connected to the charger, a continuous green LED light indicates that the
plug is plugged into an outlet socket and the battery charger is ready for operation.
■ Charging: a continuous red LED on the charger indicates that the battery is charging normally.
■ Charged: a continuous green LED on the charger indicates that the battery is ready for use.
■ After continuous or repeated charging cycles without interruption, the charger may warm up.
This is normal and does not indicate a technical defect of the battery charger.
CHARGING THE BATTERY PACK
(See Figs. 11-12)
■ Insert the charging connector into the charging port on the battery (Fig. 11).
■ Connect the charger to the power supply.
■ Allow sufficient charging time (see Product Specifications), and then disconnect the charger from
the power supply.
■ Remove the charging connector from the charging port (Fig. 12).
BATTERY PACK AND CHARGER
INDICATOR LIGHTS STATUS
Green, continuous
Fully charged / Connected to
power supply (Standby)
Red, continuous Charging
If any part of the charger is missing or damaged, do not operate it! Replace the charger with a new
one. Failure to heed this warning could result in possible serious injury.
Check the voltage! The
voltage must comply with the information on the rating label.
NOTE: It is normal for the battery pack and the charger to become warm (but not hot) during the
charging process. If the battery does not charge properly, check to make sure the electrical outlet
is operational. Always charge the battery before storage!
Fig. 11 Fig. 12
15