25
OPERATION
For cold start:
■ Make sure that the battery pack is securely in place.
■ Place the blower on a levelled surface, outdoors.
■ Press the primer bulb 5 times (Fig. 17).
■ Place the blower on your back, with the shoulder straps on and chest strap and waist strap
secured.
■ Flip the on/off switch to the “I” ON position.
■ Press the start button until the engine starts, let the engine warm up for 15 to 30s and briefly
operate the accelerator trigger. Switch the on / off switch to the "O" OFF position to stop the
engine.(Fig. 18 - 20).
NOTE:
If the engine does not start, repeat step 6 until the engine starts.
■ If the blower fails to start, check the Troubleshooting section in the manual.
NOTE:
After the engine starts and runs, release the throttle lever and allow the blower to warm up
at idle for several minutes.
For warm start:
■ Make sure that the battery pack is securely in place.
■ Place the blower outdoors on a levelled surface..
■ Press the primer bulb 5 times.
■ Place the blower on your back, with the shoulder straps on and chest strap secured.
■ Flip the on/off switch to the “I” ON position.
■ Lift the start button cover and press the start button until the engine starts.
■ Then immediately press the throttle lever to start the blower.
Starting and Stopping the Blower
(See Figs. 17-21)
Do not allow familiarity with products to make you careless. Remember that a careless fraction of
a second is sufficient to inflict serious injury.
Always wear eye protection with side shields, along with head protection. Failure to do so could
result in objects being thrown into your eyes and other possible serious injuries.
Do not use any attachments or accessories not recommended by the manufacturer or retailer
of this product. The use of attachments or accessories not recommended can result in serious
personal injury. Before each use, inspect the entire product for damaged, missing, or loose parts
such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate
this product until all missing or damaged parts are replaced.
WARNING
WARNING
WARNING