background image

33

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSE

SOLUTION

The engine does not 
start.

The on/off switch is 
switched to the stop 
position “O”.

Make sure the on/off switch is in the “I” ON 
position when starting the product.

The battery is not 
secure.

Insert the battery correctly. Ensure the battery is 
fully charged.

No spark.

Clean or replace the spark plug. Refer to the 
Spark Plug Replacement section in this manual.

No fuel.

Check that there is suf

fi

cient fuel in the fuel tank. 

Push the primer bulb until the bulb is full of fuel. 

If the bulb does not 

fi

ll, the primary fuel delivery 

system is blocked. Contact a quali

fi

ed service 

dealer. If the primer bulb 

fi

lls, the engine may be 

fl

ooded, proceed to the next item.

The engine is 

fl

ooded.

Remove the spark plug referring to the Spark 
Plug Replacement section in this manual. Press 
the start button 5 to 10 times. Then leave the 
blower still with the spark plug removed for about 
30 minutes. After 30 minutes, replace the spark 
plug referring to the Spark Plug Replacement 
section. Then re-start the engine. If the engine 

still does not start, contact a quali

fi

ed service 

dealer.

The air 

fi

lter is 

blocked.

Clean the air 

fi

lter. Refer to Cleaning the Air Filter 

section in this manual.

If your blower does not appear to operate properly, follow the instructions below. If this 
does not solve the problem, please contact your local repair agent. For replacement parts, 
please visit www.cleva-europe.com.

Before proceeding, shut off the engine, wait for all moving parts to stop, and remove the battery 

pack. Wait until the surfaces cool down. Failure to follow these instructions can result in serious 
personal injury or property damage.

WARNING

NPTBL26A Manual GB-FR V1.4_20200428 avec modifs.indd   33

04/05/2020   11:44:41

Содержание NPTBL26A









































Отзывы: