26
OPERATION
For warm start:
■
Make sure that the battery pack is securely in place.
■
Place the blower on a levelled surface, outdoors.
■
Press the primer bulb 5 times.
■
Make sure the choke lever in the RUN ( ) position.
■
Flip the on/off switch to the “I” ON position.
■
Lift the start button cover and press the start button until the engine starts. Then engage the
throttle lever to start the blower.
To stop the blower:
Release the throttle lever, then press the on/off switch to the stop position “O” until the blower
stops (Fig. 17).
Battery Indicator
A
battery indicator is located above the start button, and can be used to indicate the battery status
(Fig. 18).
When pushing the start button to start the engine, a green light indicates a fully charged battery; a
red light indicates the battery needs to be charged.
NOTE:
T
o ensure proper start, it is recommended to charge the battery pack once the battery
indicator shows a red light.
Cruise Control Lever
The cruise control lever can be used to operate the blower without holding the throttle lever.
■
T
o engage, operate the throttle lever toward the suitable speed position for blowing, and then
press down the cruise control lever (Fig. 19).
■
T
o release, lift the cruise control lever up.
Using the Concentrator Nozzle
Use the concentrator no
zz
le when high air speed is required (Fig. 20).
Make sure to release the throttle lever and allow the engine to return to idle speed before stopping
the blower. Failure to do so could result in damaging the cylinder.
WARNING
NPTBL26A Manual GB-FR V1.4_20200428 avec modifs.indd 26
04/05/2020 11:44:41
Содержание NPTBL26A
Страница 38: ...Fig 26 Fig 27 Fig 24 Fig 21 Fig 25 Fig 22 Fig 23 Fig 28 Fig 29 0 65 mm...
Страница 39: ......
