35
Bar and chain
running hot and
smoking.
Check chain tension for over
tightened condition.
Remove the battery pack and retension
the saw chain
Chain oil tank is empty.
Filling bar and chain lubricant
Debris in guide bar groove.
Clear the debris in the groove.
Brush cutter stops while
cutting.
The motor is overloaded.
The motor will recover when the load is
removed. For continuous working, decrease the
load on the power head.
The battery pack or the power head is too hot.
Allow to cool.
The battery pack is disconnected
from the tool.
Re-install the battery pack.
The battery pack is depleted
Charge the battery pack
The battery pack
charge is reduced after
more than one month of
no use.
The battery pack has automatically performed
self maintenance to extend its life.
Fully recharge the battery pack before use.
The battery endcap gets
warm during storage.
The battery pack is automatically
performed self-maintenance to
extend battery life.
No action is required; this is normal. Press the
power indicator the self maintenance process
will stop.
If the unit requires further repairs or service, visit
www.steelfort.co.nz
to find your
nearest service dealer.
WARRANTY
This product has a 3 year guarantee. This guarantee covers damages and bad function,
only if the product has not been misused and all the instructions has been correctly
followed.
In order to prove guarantee a receipt must be presented. The product has to be complete
and have all its parts. The guarantee does not cover wear, lack of maintenance,
negligence, incorrect assembly and inappropriate usage (blows, disrespect to power
supply, storage, using conditions, etc). It is also excluded when non original or non ade-
quate to the assembly accessories or parts, has been used on the product.
Содержание LB4050002KIT
