background image

10

ASSEMBLY

WARNING

J-handle
NOTE: 

The 2 screws needed for attaching the J handle to the upper shaft are found already in the 

               J handle. They must be removed for installation.
1. Align the J-handle with the front handle connector on the upper shaft (Fig. 1).
2. Attach the J-handle to the front handle connector on the upper shaft and fasten it with screws (Fig. 2).

Shaft

1. Align the upper shaft with the lower shaft . The triangle-shaped recesses must face each other 
    (Fig. 3).
2. Insert the upper shaft into the lower shaft.
3. Fasten both shafts with the locking collar (Fig. 4).

NOTE: 

The 3 screws for attaching 

 the guard to the motor housing are 
 found already in the motor housing. 
 They must be removed for installation.

The product must be fully assembled before operation! Do not use a product that is only 
partly assembled or assembled with damaged parts! Follow the assembly instructions 
step-by-step and use the pictures provided as a visual guide to easily assemble the 
product! Do not connect the product to power supply before it is completely assembled!
Failure to heed this warning could result in serious personal injury.

Fig. 1

5

Screws

7

8

Fig. 2

Fig. 3

Fig. 4

5

11

A

10

Fig. 5

12

Screws

Fig. 6

16

19

14

12

18

Safety Guard

Attach the safety guard to the gear 
head and fix it with screws (Fig. 5).

Содержание CLGT4012K





















Отзывы: