LawnMaster CLGT2412, Руководство оператора

Страница: 15 / 27

Spool Cover
Spool
Tabs
Eyelets
Slots
15
OPERATION
Fig. 15
Fig. 16
● Use only 0.065 in. diameter round monofilament line.
Use original manufacturer’s replacement line for best performance.
● Unplug the string trimmer.
● Push in tabs on side of spool cover.
● Pull spool cover up to remove.
● Remove spool.
● To install the new spool, make sure the line is captured in the anchor hole on the new spool.
Make sure the end of the line is extended approximately 6 in. beyond the slot.
● Install the new spool so that the line and slot align with the eyelet in the line head. Thread the
lines into the eyelet.
● Pull the line extending from the line head so the line releases from the slot in the spool.
● Reinstall the spool cover by depressing tabs into slot in the line head and pushing down until
spool cover clicks into place.
NOTE: Use LawnMaster spool model # RS0303 for replacement.
SPOOL REPLACEMENT ( See Figure 15.)
● Unplug the string trimmer.
● Remove the spool from the line head.
NOTE: Remove any old line remaining on the spool. Cut two pieces of line, each being
approximately 9 ft. (2.7 m) long. Use only 0.065 in. (1.65 mm) diameter round
monofilament line.
LINE REPLACEMENT ( See Figure 16.)
Anchor Hole
Spool