background image

16

SAFETY INFORMATION

■  When the battery pack is not in use, keep it away from 

other metal objects like: paper clips, coins, keys, nails, 

screws, or other small metal objects that can make a 

connection from one terminal to another. Shorting the 

battery terminals together may cause sparks, burns, or a 

fire.

■  Do not open up the battery and avoid mechanical damage 

to the battery. Risk of short circuit and fumes may be 

emitted. Ensure fresh air and seek medical assistance in 

the event of discomfort.

■  Always remove the battery pack before storing the device. 

When battery becomes fully charged, unplug the charger 

from the power supply and remove the battery pack from 

the charger.

■  Keep the battery pack dry, clean, and free from oil and 

grease. Always use a dry cloth when cleaning. Never use 

brake fluids, gasoline, petroleum-based products, or any 

solvents to clean the battery pack.

Charger Safety Information

■  Ensure the battery pack is charged indoors only, in a dry, 

cool and well-ventilated environment.

■  Do not use non-rechargeable batteries!

■  Do not operate the charger with a damaged cord or plug, 

which could cause shorting and electric shock. If damaged, 

immediately discontinue use. Replace the charger with the 

identical unit as listed in the Product Specifications in this 

manual. If the power cord for this equipment is damaged, it 

must be replaced by the manufacturer, a customer service 

agent of the same or a fully qualified person in order to 

prevent hazards.

Содержание CLCS2425









































Отзывы: