LawnMaster CLBC4009K, Руководство оператора, Страница: 21 / 26

Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore check the product using this section. In most cases the problem can be solved quickly.
WARNING
Only perform the steps described within these instructions! All further inspection, maintenance and
repair work must be performed by an qualified specialist if you cannot solve the problem yourself!
21
TROUBLESHOOTING
Problem Possible Cause Solution
1. Product does
not start
1.1 . Battery pack not properly
attached
1.2. Battery pack discharged
1.3. Battery pack damaged
1.4. Other electrical defect to
the product
1.1 Attachproperly
1.2. Remove and charge battery pack
1.3. Replace with a new one of the
same
1.4. Check by a specialist electrician
2. Product does
not reach full
power 2.1. Battery pack capacity too low
2.2. Air vents are blocked 2.1. Charge battery pack
2.2. Clean the air vents
3. Unsatisfactory
result 3.1. Cutting device is worn 3.1. Replace with a new one