B10 – SAFETY DEVICES
B10.1 –
The THROTTLE TRIGGER
LOCKOUT (refer to Brushcutter
manual) stops accidental operation
of the throttle control lever.
B10.2 -
Engine power ON/OFF
SWITCH
(refer to Brushcutter
manual).
DANGER!
The cutting device
continues to spin for a while even
after the on/off switch has been
turned to the
OFF
position.
Hold both handles firmly until the
cutting device has come to a com-
plete stop. See section
STARTING
AND STOPPING.
A
6
1
4
5
3
2
3. DESCRIPTION OF MACHINE
PARTS (picture 1)
1)
Shaft
2-3)
Gearbox
4-5)
Cutting blades
6)
Blade holder bar
7)
Shaft clamp locking screw
8)
Shaft centring screw
9)
Blade guards
10)
Tilting handle
11)
Tilting selector switch lockout knob
12)
Tilting angle selector switch
9
HEDGE TRIMMER INSTRUCTIONS MANUAL
4. ASSEMBLY
1)
The packaging box contains the gearbox and
the blades, separated from the shaft (see fig. 2)
FITTING THE BLADE UNIT ONTO THE
SHAFT
1)
Fit the hedge trimmer
(fig. 3 item 1) onto the
bottom drive shaft (fig. 3 item 2), making sure
that the drive spindle (fig. 3 item 3) is correctly
located inside the gearbox housing.
WARNING
The locating hole (fig. 3 item A) on the shaft must
match the position of the gearbox hole (fig. 3
item B).
2)
Firstly fit and tighten the screw (fig. 4 item 1),
then firmly tighten the clamp (fig. 4 item 2).
FITTING THE WHOLE HEDGE TRIMMER UNIT
ONTO THE MOTORISED UNIT
WARNING! The hedge trimmer can be
fitted in 3 different positions
matching the 3 holes located in the
top shaft clamp (fig.6).
A - 0° (fig.7)
C - 180° (fig.8)
POSITION A
Содержание PBT3446TP
