Installing/Removing the Metal Cutting Blade
Dismantling the Nylon Head is described in the section on
« Installing/Removing the Nylon Head ».
Wear protective gloves when handling the metal cutting blade.
14
Installing the Metal Blade Guard (picture 5):
1. If applicable, unscrew the top (33b) and bottom (33a) flanges mounted on gear housing (19).
2. Screw the guard (20) onto the gear housing (19) using the 3 screws (34) enclosed.
Installing the metal cutting blade (picture 5):
3. Place the metal cutting blade (18) and flanges (33a+b) on the Gear Housing (19) in the
following order: Bottom flange (33a) – metal cutting blade (18) – top flange (33b).
4. Screw on the metal cutting blade (18) anticlockwise using the fixing nut (35) and with the aid of
the Maintenance Socket Spanner (see picture 2, no. 26).
35
33b
18
pic. 5
20
33a
34
19
1
2
