Lawn-Boy Insight 34001, Руководство оператора

Страница: 10 / 20

Important:
Do not use the primer or the choke
if the engine has been running and is hot.
Excessive priming may flood the engine and
prevent it from starting.
4. Connect an extension cord to a power source and
the snowthrower, and push the electric-start button
(model 34002 only) (Figure 18) or pull the recoil
starter (Figure 19).
Figure 18
1. Electric-start button 2. Extension cord
Figure 19
Important:
Run the electric starter no more
than 10 times at intervals of 5 seconds on, then
5 seconds off. Running the electric starter
extensively can overheat and damage it. If the
engine does not start after this series of attempts,
wait at least 40 minutes to allow the starter to
cool before attempting to start it again. If the
engine does not start after the second series of
attempts, take the snowthrower to an Authorized
Service Dealer for service (model 34002 only).
5. While the engine is running, push in the choke lever.
6. Unplug the extension cord from the power source
and the snowthrower (model 34002 only).
If you leave the snowthrower plugged into a
power outlet, someone can inadvertently start
the snowthrower and injure people or damage
property (model 34002 only).
Unplug the power cord whenever you are not
starting the snowthrower.
Engaging the Rotor Blades
To engage the rotor blades, hold the control bar against
the handle (Figure 20).
Figure 20
Disengaging the Rotor Blades
To disengage the rotor blades, release the control bar
(Figure 21).
Figure 21
10