Accessories
GB–24
4.
Place front corner of chute baffle into deck
opening. Rotate chute counterclockwise and
push down into deck opening (Fig. 35).
1073
1
2
3
Figure 35
1.
Chute baffle
2.
Deck baffle
3.
Toe guard
IMPORTANT: The chute baffle must go
behind the front deck baffle and between
blade and toe guard to prevent contact with
blade.
5.
Insert chute support rod through hole at right
rear of deck (Fig. 36).
2035
3
2
1
Figure 36
1.
Chute support rod
2.
Chute assembly
3.
Bolt
6.
Two shoulder bolts on the mower housing
protrude through slotted holes in the chute
assembly and do not have to be loosened or
removed. Chute assembly moves over the
shoulder bolts (Fig. 34).
7.
Slide chute assembly in a clockwise direction to
install or counterclockwise to remove.
8.
Secure with bolt (Fig. 36).
9.
Check clearance between blade tips and chute
baffle making sure there is no contact (Fig. 37).
IMPORTANT: The chute baffle must go
behind the front deck baffle and between
blade and toe guard to prevent contact with
blade (Fig. 37).
1129
1
2
3
Figure 37
1.
Chute baffle
2.
Front deck baffle
3.
Toe guard
10. Remove knob and bolt securing left side upper
and lower handle sections (Fig. 38).
