Lawn-Boy 10730, Руководство оператора

Страница: 2 / 20

WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals
known to the State of California to cause cancer,
birth defects, or other reproductive harm.
The engine exhaust from this product
contains chemicals known to the State of
California to cause cancer, birth defects,
or other reproductive harm.
Important:
This engine is not equipped with a spark
arrester muffler. It is a violation of California Public
Resource Code Section 4442 to use or operate the engine
on any forest-covered, brush-covered, or grass-covered
land. Other states or federal areas may have similar laws.
This spark ignition system complies with Canadian ICES-002.
The enclosed
Engine Owner's Manual
is supplied for
information regarding the US Environmental Protection
Agency (EPA) and the California Emission Control
Regulation of emission systems, maintenance, and
warranty. Replacements may be ordered through the
engine manufacturer.
Net Torque
The gross or net torque of this engine was laboratory rated
by the engine manufacturer in accordance with the Society of
Automotive Engineers (SAE) J1940. As configured to meet
safety, emission, and operating requirements, the actual engine
torque on this class of mower will be significantly lower.
Contents
Introduction .................................................................. 1
General Operation .................................................. 2
Slope Operation ...................................................... 3
Children................................................................. 3
Service ................................................................... 3
Safety and Instructional Decals ................................. 4
Setup ............................................................................ 6
Unfolding the Handle .............................................. 6
Installing the Recoil-starter Rope in the Rope
Guide................................................................. 6
Filling the Engine with Oil ........................................ 6
Charging the Battery (Electric-start models
only) .................................................................. 7
Product Overview .......................................................... 7
Operation ..................................................................... 8
Attachments/Accessories......................................... 8
Filling the Fuel Tank ................................................ 8
Checking the Engine-oil Level................................... 8
Adjusting the Cutting Height .................................... 9
Starting the Engine .................................................. 9
Using the Self-propel Drive (Self-propel models
only) .................................................................10
Stopping the Engine ...............................................10
Mulching the Clippings ...........................................10
Bagging the Clippings .............................................10
Operating Tips ......................................................11
Maintenance .................................................................12
Recommended Maintenance Schedule(s) ......................12
Preparing for Maintenance.......................................12
Servicing the Air Cleaner .........................................13
Changing the Engine Oil .........................................13
Charging the Battery (Electric-start models
only) .................................................................14
Replacing the Fuse (Electric-start models
only) .................................................................14
Replacing the Blade ................................................15
Adjusting the Self-propel Drive Cable (Self-propel
models only) ......................................................16
Cleaning the Underside of the Machine......................16
Storage ........................................................................17
Preparing the Machine for Storage ............................17
Folding the Handle .................................................17
Removing the Machine from Storage.........................17
Safety
This machine meets or exceeds the CPSC blade safety
requirements for walk-behind rotary lawn mowers.
Read and understand the contents of this manual before
you start the engine.
The safety alert symbol (Figure 2) is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Improperly using or maintaining this mower could result in
injury or death. To reduce this potential, comply with the
following safety instructions.
The following instructions have been adapted from the
ANSI/OPEI standard B71.1-2003.
This cutting machine is capable of amputating hands
and feet and of throwing objects. Failure to observe
the following safety instructions could result in serious
injury or death.
General Operation
•
Read, understand, and follow all instructions on the
machine and in the manual(s) before starting.
•
Do not put hands or feet near or under the machine.
Keep clear of the discharge opening at all times.
•
Allow only responsible adults, who are familiar with the
instructions, to operate this machine.
•
Clear the area of objects such as rocks, wire, toys, etc.,
which could be thrown by the blade. Stay behind the
handle when the engine is running.
2