5. Trigger the gun to eliminate trapped air, wait
for a steady flow of water to emerge from the
spray nozzle (fig. 9).
fig. 9
ACAUTION!
In order to assist the first startup,
it is recommended to hold the trigger pressed
during the pulling of the starter handle
6. Push the fuel cock to ON position (Fig. 10).
ON
ON
Fuel cock
fig. 10
7. Push the choke lever to the OFF position OFF
(Fig. 11).
fig. 11
Chock lever
CLOSE
OFF
NOTE
Do not the choke if the engine is warm or
the air temperature is high.
8. Start the engine (Fig. 13).
fig. 13
Engine
switch
Starting rope
handle
ON
a) Push the engine switch to the ON position.
b) Pull slightly the starting rope handle up until
feeing anti-action, and then make
a
rapid pull.
CAUTION
Return the starting rope handle gently to prevent
damage to the starter.
9. Preheat the engine and push back the choke
lever to “OPEN” (Fig.14).
Choke lever
fig. 14
OPEN
II. STOP
In an emergency, push the engine switch to
“OFF” to stall the engine. Stop it in normal in the
following sequence:
1. Push the engine switch to the OFF position
(Fig. 15).
fig. 15
OFF
2. Set the fuel cock to the OFF position (Fig. 16).
fig. 16
OFF
Fuel cock
CAUTION:
Turn off the machine when
finished working.
CAUTION:
When the machine is switched
off, always discharge the pressure hose, opening
the gun.
MAINTENANCE
CAUTION:
Before to carry out any kind of
maintenance to the washer machine, run the
pressure down, take the water connection out.
*-6#3*$"5*0/
Motor:
see “owner’s manual - general gasoline
engine”.
)JHIQSFTTVSF XBUFS QVNQ
we recommend
18
