Lavorwash EASY-R BT, Руководство пользователя

Страница: 36 / 168

with the available voltage and that the electrical out-
let is grounded (earthed).
Do not damage the feed cable; do not crush or pull on it.
• ATTENTION Make sure that the power cable does
not come into contact with the rotary brushes.
• ATTENTION !!! - The power mains AC 230V ma-
chine has parts, which are connected to the cur-
rent; contact with these could cause grave injuries
or even death.
- Before executing any type of operation on the ma-
chine always disconnect it from the electrical source.
- Never touch electric cables that are defective or worn.
- Before gaining access to the electrical system it is
always necessary to disconnect the machine from
the electrical source by removing the plug from the
socket-outlet.
- In the case of defective, damaged, or cracked electric
cables, replace immediately with authentic replace-
ment parts.
- The network of connections must be protected from
water spray.
- The patch cord for the connection of the machine
to the mains power must conforms to current
safety rules.
- The electrical system to which the machine is con-
nected must be equipped with a cutout box.
- It is absolutely forbidden to use the machine in
proximity to swimming pools or stretches of water.
• EMERGENCY SITUATIONS
In case of emergency:
- Immediately disconnect the machine from the
power mains.
- Immediately apply proper first-aid.
If an accident should occur the machine must not be
put into operation until a technician authorized by
the manufacturer has examined it.
7. MAINTENANCE INFORMATIONS
36
When needed After every use Weekly Monthly
Remove and wash the squeegee X
Drain the recovery tank X
Drain, rinse with clean water or sanificate the recovery tank X
Charge the batteries X X
Check the acid level in the battery cells (if batteries are not mainte-
nance-free)
X
Check the wear of the squeegee rubber blades X
Open and clean the suction filter X
Remove brushes and check for brush wear, foreign bodies and wrapped
belts
X
Verify the machine general conditions. X
Open and clean the solution water filter X
Verify that suction hose and conduct are free from obstructions X
Check and clean the pivoting wheels X
Check wear and function of traction drive belt or chain; if necessary,
adjust belt or chain tension
X
Clean the brush plate, squeegee support and squeegee X
Check the lifting/lowering of the brush plate. X
Check the lifting/lowering of the squeegee. X
Grease the moving parts. X
Check the control cable for the opening of the solution water tap. X
Descale water hoses. X