Lavor Wash Pro Montage, Перевод оригинальной инструкции

Страница: 13 / 28

CARE AND MAINTENANCE
• The machine shall be disconnected from its power
source, by removing the plug from the socket-
outlet, during cleaning or maintenance .
• Clean the exterior part of the machine with a dry
cloth.
• Move the appliance only by catching the carrying
handle located on the motor head.
• Store the appliance and the accessories in a dry
safe place, out of the reach of children.
• A dust-technical inspection is to be carried out at least
once every year by the manufacturer or an instructed
person, e.g. for damage of the filter, tightness against
leakage of the vacuum cleaner and function of the
control unit.
• For category L vacuum cleaners that were in contami-
nated environments, the exterior as well as all machi-
ne parts should be cleaned.
• When performing maintenance and repair work, all
contaminated components that cannot be cleaned to
satisfactory must be disposed of.
• Such components must be disposed of in impermea-
ble plastic bags conforming with the valid regulations
for the disposal of such waste.
REMOVING THE FILTER
⑦
(Collection Bag)
• Unlock the container catches
⑫
and remove the
vacuum head.
• Using the card reinforced opening pull the full
collection bag towards of paper Filter
⑦
to rear off
the tank deflector flange.
• Carefully remove the paper Filter out of the vacuum
cleaner without damaging it. When doing this, pay
attention that the disposal bag does not get caught or
ripped open against the tank deflector flange or other
sharp objects or projections.
• Dispose of the paper Filter in an appropriate container
according to the respective national regulations.
FILTER CLEANING
•
The machine shall be disconnected from its power
source, by removing the plug from the socket-
outlet, during cleaning or maintenance
• Remove the filter
⑪
,
⑥
,
⑯
• Shake the filter
⑪
,
⑥
,
⑯
•
Once the filter has been cleaned, check whether it
is suitable for further use. If it has been damaged or
broken, replace it with an original filter.
GENUINE SPARES AND CONSUMABLES
Always replace parts with genuine spares. These are
available from your local store dealer. When ordering
parts always quote your model number.
3.752.0195
⑥
HEPA Filter (dry suction)
3.752.0273
⑦
Paper Filter, bag
4.208.0359
⑪
Filter-retaining disc
3.753.0003
⑬
Handle
3.752.0267
⑯
Filter (dry suction)
5.209.0201
⑰
Flexible hose
3.753.0103
⑱
Extension Tube
3.754.0188
⑲
Accessory holder (carpet accessory)
3.754.0189
⑳
Floor accessory brush (dry suction)
3.754.0005
㉑
Straight lance
4.208.0063
㉒
Power tool adapter (outlet models)
3.752.0175
㉓
Filter (liquid suction)
3.754.0004
㉔
Small brush
3.754.0190
㉖
Floor accessory (liquid suction)
After Sales Service
Should you require service at any time, please contact
your local After Sales Service.
WARRANTY CONDITIONS
All our machines are subjected to strict tests and are
covered against manufacturing defects in accordance
with applicable regulations. The warranty is effective
from the date of purchase.
The following are not included in the warranty: -
Parts subject to normal wear. - Rubber parts, charcoal,
filters and the accessories and optional accessories.
- Accidental damage, caused by transport, neglect or
inadequate treatment, incorrect or improper use and
installation failing - The warranty shall not cover any
cleaning operations to which the operative components
may be subjected, such as clogged nozzles and filter
blocked due to limestones.
DISPOSAL (WEEE)
c
As the owner of electrical or electronic equipment,
the law (in accordance with the EU Directive 2002/96/
EC of 27 January 2003) prohibits you from disposing
of this product or its electrical / electronic accessories
as municipal solid waste and obliges you to make use
of the appropriate waste collection facilities.
The product can be disposed of by returning it to the
distributor when a new product is purchased. The new
product must be equivalent to that being disposed of.
13