![background image](http://html2.mh-extra.com/html/lavor/edp-5000/edp-5000_instruction-manual_3945092031.webp)
31
GB
ELECTRICAL sAfETY
@
Always check that the power
supply corresponds to the voltage
on the rating plate.
DEsCRIPTION (fIG. A)
Your submergible pump has been designed to
pump clean and slightly polluted water.
The pump is not intended for continuous use.
1 Float switch
2 Outlet opening
3 Handle
Connecting the outlet pipe (fig. A)
n
Connect the outlet pipe to the outlet opening
(2).
Positioning the pump (fig. A)
n
Hold the pump by the handle (3).
n
Lower the pump carefully in the water.
n
Check that the pump is standing firmly on the
bottom.
@
Before installing or moving the
pump always remove the mains
plug from the wall socket.
Switching on and off (fig. A)
n
To switch on the pump, insert the mains plug
in the wall socket.
n
To switch off the pump, remove the mains
plug from the wall socket.
The pump only operates when the float switch (1)
floats. This prevents the pump from running dry
during operation.
@
The pump has been fitted with
a thermal protection. In case of
overload the motor is switched off.
After the motor has cooled down
the pump automatically switches
on again.
CLEANING AND MAINTENANCE
The pump is maintenance free. Defects must only
be repaired by an authorised service station.
@
The pump must not be opened by
the user.
Bleeding the pump housing (fig. A)
After each use the pump housing must be drained.
n
Remove the water hoses present.
n
Remove the screw from the bleeding point (7).
n
Tilt the machine forward and empty the pump
housing.
n
Reinsert the screw and tighten it securely.
@
Never fully close the bleeding point
if you leave the machine in an area
colder than 0 °C.
TECHNICAL DATA
EDP 5000
Mains voltage
V 230
Mains frequency
Hz 50
Power input
W 350
Max. pump capacity
l/min 5,000
Max. submerging depth
m 5
Max. lift
m 6.5
Max. grain size
mm 5
Max. water temperature
°C 35
Weight
kg 4.1
Level of sound pressure measured according
to ISO 3744:
EDP 5000
L
pA
(sound pressure)
dB(A) < 70
GUARANTEE
This product has been thoroughly checked in
the factory. After purchase date a full 2 year’s
guarantee applies to material and production
defects. A guarantee of 6 months applies to
rechargeable batteries/battery packs and chargers.
Guarantee conditions
If the product shows defects as a result of
material and production defects during the
period of guarantee, we guarantee free repair on
condition that:
the product has been used properly and for
the purpose for which it has been intended.
repairs are professionally carried out by
a person appointed by the supplier.
the proof of purchase will be submitted.
Accessories and parts showing normal wear are
not covered by any guarantee.
Содержание EDP 5000
