![LAVOR Pro GV 3,3 M PLUS Скачать руководство пользователя страница 15](http://html1.mh-extra.com/html/lavor-pro/gv-3-3-m-plus/gv-3-3-m-plus_manual_3928451015.webp)
- Never use distilled water! The machine may not run correctly.
14
USER’S INSTRUCTIONS
6 Water reserve tank.
7 Detergent reserve tank (properly diluted in water).
8 Water recirculation container, complete with “over-flow” system. This container is equipped with a special dirt filtration
system that must be cleaned on a regular basis.
WARNING: before using the machine, the recirculation water container must have approximately 1cm of water
inside it, in order for the water filter to function properly. This operation must be carried out even after having
emptied the container (minimum level).
STARTING UP AND OPERATING THE MACHINE
1) Check the level of the water and detergent tanks. If necessary, fill these tanks.
2) Connect the supply cable to the main line socket.
3) Turn main switch (1) to ON position.
4) Wait for the green HEATING light (E) to turn itself off and make sure the gauge (5) shows a pressure reading of 9 bar.
At this point, the machine is ready for operation.
5) To discharge the detergent, press the SOAP ON button (I).
SWITCHING OFF THE MACHINE
1) Press ENABLE DRAIN button (K) to disable the resistances and water pump.
2) Using the pistol, allow all the steam in the boiler to discharged.
3) Turn the main switch (1) to the OFF position.
WARNING