Lavinia Boho Biore, Инструкции по монтажу и использованию

Страница: 8 / 10

Instructions for use and safety measures
Check the holding strength after bathtub installation.
Correct mounting of the product ensures proper flushing of the bathtub and water drain.
Use the bathtub for intended purpose only. It is strictly prohibited to:
— install drain fittings not designed for acrylic bathtubs (siphons with metal side adjacent to the
acrylic surface and with a thin PVC gasket);
— use sets and installation kits of third-party manufacturers, including fastening materials and supports;
— fill the bathtub with water above 60 degrees Celsius;
— Throw away garbage or household waste in the bathtub;
— pour cement and adhesive mixtures/solutions into the bathtub;
— put or drop any items in the bathtub;
— use sea, mineral water or other aggressive media.
Safety measures:
— the bathtub surface is smooth, slippery if wet, be extremely careful when getting in and out of the
bathtub;
— taking a bath in alcohol intoxication can lead to tragic consequences;
— do not leave children unattended when taking bath;
— do not use electrical appliances when taking bath;
— to avoid falling, do not step on the side of the bathtub. Do
not allow any animals into the bathtub.
Annually check the mounting position and holding strength of the bathtub.
Instructions for care
Every time the bathtub is used, it is required to wipe the product with dry or wet (depending on pollution
type) soft cloth.
To avoid yellow spots and streaks, every time the bathtub is used, we recommend to wipe the product dry
with a soft cloth.
Avoid using bad water (hard water, water with mechanical impurities, etc.) when using bathtub. Do
not connect the bathtub to the water supply network having parameters inconsistent with the
given instructions.
The product surface is easy to clean. Use warm soapy water and detergent marked “for acrylic bathtubs
and plastic products” to clean the bathtub surface; do not use abrasive, acid, alkaline or other aggressive
cleaning agents, different solvents, including organic solvents, as they may damage the product coating.
Do not use hard and wire brushes (or other cleaning agents that may damage the product surface) when
cleaning the bathtub.
Bathtub repair
Physical damage of the bathtub (including cracks, chips, etc.) cannot be repaired.
Repair of the sewer the drain fittings is connected to, can be carried out only by qualified plumbers. Do not
clean the bathtub drain hole with abrasive, acid, alkaline or other aggressive cleaning agents, different
solvents, including organic solvents, as well mechanically, when the product coating can be damaged.
It is forbidden to use the bathtub with physical damages or malfunctions of drain fittings or sewerage
system. In the event of malfunction, turn off the water supply to the point of entry into the bathtub.
Transportation and handling of the bathtub
The bathtub shall be transported in an undamaged original package only. The product can be shipped by
any transport ensuring protection of cargo from atmospheric
8 Lavinia Boho