lavina V20GE, Руководство пользователя

Страница: 18 / 47

Superabrasive Owner’s manual original language – Lavina
®
V20GE 01/2020
18
7.3 MAIN FILTER CHANGE
WARNING:
1. Turn off the engine and wait for the fan impeller to completely stop before opening the
machine to change filters.
2.
Do not touch the exhaust! It will get very hot even when running the engine for a short
time.
IMPORTANT: All of the following procedures must be performed with the dust collector turned off
(look at the beginning of chapter 7). Before performing any work or maintenance on the vacuum, be
sure to wear the proper protective equipment. This might include clothing which covers any exposed
skin, protective eyewear, a respirator, and/or protective gloves conforming to protection class FFP3.
To replace the main filter, first release the three latches (fig. 7.3 pos. 1) then open the head cover
(fig. 7.3 pos. 2). Once opened, lift out the used filter (fig. 7.3 pos. 3) and place it carefully in a plastic
bag. This bag must be properly disposed. Clean the area where the filter lies (fig. 7.3 A) and then
insert the new filter. Only original filters may be used.
Figure 7.3