Superabrasive
Owner’s Manual Original Language – Lavina
®
32-S-E
6/2013
1. GENERAL INFORMATION
This owner’s manual is intended for the operator of the Lavina
®
32-S-E machine, the servicing technician as well as for
anyone involved with operating or servicing the machine. We recommend that you read the instructions very carefully
and follow them strictly. The manual includes information about assembling, using, handling, adjusting and maintaining
your Lavina
®
32-S-E floor grinding and polishing machine.
MANUFACTURER
Superabrasive was founded in 1987, as a manufacturer of high quality diamond tools for the stone and concrete
industry. Today, Superabrasive is one of the world’s leading companies in the production of diamond tools and floor
grinding machinery. At Superabrasive, we strive to deliver the very best solutions to our customers, and enable them to
work more efficiently.
GENERAL DESCRIPTION
The Lavina
®
32-S-E machine is intended for grinding, polishing and buffing concrete, marble, granite, limestone and
terrazzo surfaces with diamond tools.
The Lavina
®
32-S-E is a six-disc machine, which can be used dry as well as wet.
For best results, use only tools manufactured or recommended by Superabrasive and its distributors.
WARNING!
The Lavina
®
32-S-E machine is manufactured and fitted for the above-mentioned applications only! Every other use
may possess risks to the persons involved.
MACHINE CHARACTERISTICS
The Lavina
®
32-S-E is made of two main component sections:
LAVINA
®
32-S-E MAIN DESIGN
The two main component sections, the carriage and main
head.
The handle on the frame is adjustable in height and allows the
operator to work in a correct and safe posture.
Two halogen spotlights
(Fig.1.2) enable the operator to work
in darker areas. The lamp holder can be adjusted in different
positions.
Existing lighting system does not replace adequate overhead lighting.
A
frame
(U-joint technology)
on
top of the motor
base is providing the main head a possible to move
to all sides and it gives more grinding capacity.
The controls
are positioned on top of the handle
(fig.1.3)
The electrical box
(fig.1.4) contains the electric
switching devices and the inverter. The motor
feeding cable is plugged in the socket located on
the bottom of the box. The
main feeding cable
is connected with a plug and socket
on the side of the box.
The water tank
is on the opposite side of the frame, so that the weight of the water has no influence on the operation of
the machine. The frame weight, on the other hand, is fully absorbed by the driving wheels.
The motor
is mounted on the base plate and is the six grinding heads are driven by a two-belt system. The
planetary
head
is driven by a third flat belt.
Mounting
a third wheel
(Fig.1.4) ensures easier movement of the machine.
Figure 1.2
Figure 1 1
Figure 1.1
Figure 1.3
Figure 1.4
