LaView USA 4-CH DVR, Быстрый старт

Страница: 8 / 18

8
4/8/16-CH DVR Quick Start Guide
6. Recording Setup
There are four kinds of record modes. You will need to install and format the
HDD, and set all the record parameters before recording.
6.1 Manual Recording
A user can press REC button on the front panel after quitting system setup.
Press the button again to stop recording.
Or press REC button on the remote controller. Click it again to stop
Or right click the mouse, select “Record”, click it to enter the Record Control
interface as shown below. Select “Manual” to start recording, and select “Stop” to
stop recording.
6.2 Schedule Recording
To Setup Schedule Recording:
Step1 :
Select Menu Record, then click on the Record Plan tab. Refer to
the following picture.
【
Channel
】 ：
Selects the video feed channel. To select a channel, click on
the arrow at the right of the selection box and a channel list will drop down.
Select the required channel.
【
Green, yellow, and red represent
】
: Regular, MD (motion detection),
and Alarm recording modes. You can modify the recording settings for each
day listed by clicking on the
【
Set
】
button next to that day. A
configuration window will pop up to allow you to configure the settings.