3.3. Machine positioning
Warning
Check that the surface prepared for the machine
installation, has dimensions and sturdiness suitable
to safely support the machine.
Note
For a correct ergonomic use of the machine, place
it on a working surface not lower than one meter
from the floor.
4. HANDLING AND STORAGE
4.1. Handling
During handling and transport, the machine must
remain in a vertical position according to the directions
on the packaging. Carry out lifting and positioning with
care. Do not shake the machine.
4.2. Storage
The machine should be stored according to the follo-
wing conditions:
- minimum temperature: above 4°C;
- maximum temperature: below 40°C;
- maximum humidity: below 95%.
The machine is packaged in cardboard and polystyrene.
5. DISMANTLING
Environment
Disposal of machine components after dismantling,
should be carried out with respect for the environ-
ment, avoiding pollution of the soil, water and air.
Any operation should comply with local legislation
in force.
8
Manual code 10083445 / Rel. 0.00 / April 2010
Maintenance manual for technical assistance LB 2300-2301-2302-2311-2312
