Maintenance manual for technical assistance - LB 2800 - LB 2810
Manual code 10066574 / Rel. 0.00 / March 2009
15
7.2. Programming cappuccino doses
Place the programming
lever (
1
), located under the
boiler cover of the machine,
in the ON position.
Insert a pod in the filter hol-
der and attach the filter hol-
der to the group, tightening
firmly.
Put the cup under the
dispensing spout of the cappuccinatore.
Press the PROG/STOP button (
2
) for about 5 seconds;
all the dose button LEDs will come on.
Press the desired cappuccino dose button (
4
).
Delivery of coffee will begin; when the desired dose of
coffee is attained, confirm by pressing the
PROG/STOP button (
2
).
Milk dispensing will start automatically.
When the desired dose of milk has been attained, con-
firm by pressing the PROG/STOP button (
2
).
Repeat the operation for the other dose button.
When finished programming, return the programming
lever (
1
) to the OFF position.
5
2
2
ON
ON
1
5
2
2
ON
ON
2
3
4
3
4
Note
The programming of each dose must be done with
a new pod and not with previously used pods.
Attention
Programming must be performed by technical
staff.
Use caution when accessing the interior of the
machine (setting the programming lever) due to
the high temperature of some of the components
and the present of live voltage.
7.3. Programming hot water doses
Place the programming
lever (
1
), located under the
upper grille of the machi-
ne, in the ON position.
Place the cup under the
hot water dispensing noz-
zle (
6
).
5
2
2
5
6
5
2
2
ON
ON
1
Press the PROG/STOP button (
2
) for about 5 seconds;
all the dose button LEDs will come on.
Press the hot water delivery key (
5
).
Upon reaching the desired serving confirm by again
pressing the key for water delivery (
5
).
Press the PROG/STOP key (
2
).
Return the programming lever (
1
) to the OFF position.
5
2
2
ON
ON
2
