LAVAMAT 74952A3, Руководство пользователя

Страница: 7 / 40

6 TIME SAVING button (ZEITSPAREN)
7 START/PAUSE button (START/PAUSE)
8 DELAY START button (ZEITVORWAHL)
9 Display
= Handwash = Cold
= Rinse Hold = Child Lock
Display (7)
7.1 7.2
7.3
7.4
7.5
7.1 Child safety lock
symbol
7.2
•
Duration of selected programme
: after selecting a programme, the duration is dis -
played in hours and minutes (for example 2.05). The duration is calculated automatically
on the basis of the maximum recommended load for each type of fabric. After the pro -
gramme has started, the time remaining is updated every minute.
• Alarm codes : in the event of operating problems, some alarm codes can be displayed,
for example E20 (see chapter «What to do if...»).
• End of programme
: when the programme has finished a blinking zero is displayed,
the symbol 7.5 (Door locked) disappears on the display, the pilot light of button 8 goes
out and the door can be opened.
• Incorrect option selection
: if an option which is not compatible with the set wash
programme is selected, the message Err is displayed for a few seconds and the yellow
pilot light of button
8
light starts blinking.
•
Delay Start
: the selected delay (20 hours max) set by the relevant button appears on
the display for a few seconds, then the duration of the previously selected programme
is displayed. The symbol
7.3
will appear on the display. The delay time value decreases
by one unit every hour. When only 1 hour remains, the time decreases every minute.
7.3 Delay Start - symbol
7.4 Programme progress display
: the display shows the different washing programme
phases. After the appliance starts operating, the display show the relevant symbol of the
washing phase which is running: = WASHING, = RINSING, = DRAINING, =
SPINNING - symbols
7.5 Door lock symbol
This symbol indicates if the door can be opened:
• symbol on: the door cannot be opened. The appliance is running or the appliance has
stopped with water left in the tub.
7