background image

LAVA Computer MFG. Inc.                                                                                        STS-RBM Installation Manual 

– A03 

 
 

  2 Vulcan St. Toronto, ON        Tel:  +1 416 674-5942         www.lavalink.com

                                

2 of 8 

  Canada, M9W 1L2                   Fax: +1 416 674-8262         Toll-Free (US & Canada): 800 241-5282

 

 

  

Introduction 

Using a LAVA STS-RBM requires the following installation steps: 
 

 

Obtain a copy of the “LAVA STS-RBM Software Release.RAR” from LAVA Sales or Support 

 

Copy the LTM.INI file, required by your tablet,  to the tablet “Download” folder 

 

Install the LAVA Tablet Manager applications on the tablet 

 

Install the LAVA Battery Information application on the tablet 

 

Enable a WiFi connection 

 

Enable the LTM application as a Device Administrator and activate the KNOX license 

 

Disable the WiFi connection (optional) 

 

Turn off the “auto screen brightness” on the Tablet 

 

Verify the time zone and time on the Tablet 

 

Verify the TYPE jumpers on the STS-RBM are set for your tablet model  

 

Connect the STS-RBM Product to the Tablet with the supplied LAVA cable 

 

Apply power to the STS-RBM Product 

 
Do not plug in USB accessories during the initial setup. Always test a system in incremental steps and in 
the prescribed order. 
 
This document describes each of the above steps in further detail. 
 

Note: 

The LAVA Tablet Manager 

must

 be installed on the tablet; else the STS-RBM Product 

restarts the tablet power and USB connection every few minutes. 
 

Note: 

The TYPE jumpers on the STS-RBM must be set for your tablet model.  

 

Содержание STS-RBM









Отзывы: