Rev. A00
HQ-ST System Manual
Page 24 of 32
APPENDIX C: Check that the LAN Provides DHCP Setting Configurations to
Devices on the LAN
TO VERIFY:
1.
On the PC/laptop open a COMMAND LINE box, ie. Start>Run>cmd.
2.
Enter the command ipconfig /all parameters will be displayed.
3.
Check if the DHCP is ON/ENABLED or OFF (Static IP setting operation). If OFF, make a note of the network
parameter IP settings for IP address, netmask, gateway, and DNS.
4.
Make a note if DHCP is available on the LAN.
5.
If DHCP is not available on the LAN make a note of the STATIC IP parameters that must be used on the LAN in order
to access Internet.
Alternative method to check if the PC/laptop is operating using STATIC IP settings or DHCP
1.
Navigate to Start>Settings>Network & Dial-Up Connections>Local Area Connection>Properties>Internet
Properties>TCP/IP>Properties.
2.
If automatic settings are in use then the PC is using DHCP from the LAN, rather than STATIC settings (which would
be indicated by the IP address fields being empty).
Содержание HQ-ST Link
Страница 1: ...LAVA HQ ST Link System Manual Rev A00 ...