Configuring Ether Link network settings using the
Ether Link
Manager
To set an Ether Link's network
settings using the
, right-click on it in the
Ether Link tree and select
“Properties”. If the Ether Link is
accessible on the network, a
dialog will open that allows you
to give it a new name, IP
address, subnet mask, and
gateway address. If your
network assigns IP addresses
using a DHCP server, DHCP
detection can also be enabled.
The
can also
auto-configure a link when a
DNS server is used.
Changes made using the
will be updated
to both the local PC and to the
Ether Link.
Changing the network settings of an Ether Link device may
make that device unavailable to other stations that have activated
a connection to that device using older network settings.
The
is the recommended method of
changing all Ether-Serial Link settings.
Ether Link
Manager
Ether Link Manager
Ether
Link Manager
Ether Link Manager
NOTE:
NOTE:
6