Unless you already have more than 4 Com Ports installed in
your PC, Windows will by default configure the DSerial-PCI
as Com5 and Com6. If you wish to change the Com
number of either one of the ports on the DSerial-PCI
(e.g. Assign Port 1 to be Com 3), please use the Lava Com Port
Redirect Utility included in the “Utils“ subdirectory of your
Installation Diskette. This may be necessary because some
communications applications programs do not recognize port
designations beyond Com 4. The Lava Com Port Redirect
Utility will allow you to change the Com numbering of your
ports without changing I/O address resources.
To install the Lava Com Port Redirect Utility on your hard drive,
insert the Installation Diskette into your floppy drive, click
Start, Run and type A:\Utils\Setup.
Powered
Powered
Changing the Com numbering of your ports
in Windows 95/98/Me
