Lava Heat MINI LAVA, Руководство пользователя

Страница: 9 / 19

8
ASSEMBLY INSTRUCTIONS
Move the burner control knob to the off position. Fix the
1.02 lb. propane cylinder to the regulator (rotate the
propane cylinder clockwise toward the regulator connecting
until tight).
Close the door plate and lock it with the handle.
Disconnect the cylinder when the appliance is not used.
Store the appliance indoors only if the cylinder is disconnected and removed
from the appliance.
You may place the appliance in a shelter:
(a) With walls on all sides, but with no overhead cover.
(b) Within a partial enclosure which includes an overhead cover and no more than two side walls.
These side walls may be parallel, as in a breezeway, or at right angles to each other.
(c) Within a partial enclosure which includes an overhead cover and three side walls, as long
as 30 percent or more of the horizontal periphery of the enclosure is permanently open.
Use a replacement pressure regulator specified by the appliance manufacturer. Use the pressure
regulator and hose assembly supplied with the appliance.
Do not store a spare LP-gas cylinder under or near this appliance;
Never fill the cylinder beyond 80 percent full;
Place the dust cap on the cylinder valve outlet whenever the cylinder is not
in use. Only install the type of dust cap on the cylinder valve that is provided with
the cylinder valve. Other type of caps or plugs may result in leakage of propane.