Step3
3-1.Put the barrel body on the ground which was installed in
the first step,and then put the heater on it, 3-2.aimed at
the bolt hole;
3-2.Connect the support bar to the heater chassis on the
top with five M8 15 mm screws
Step4
3-1.
Connect the rubber hose which was on the gas
pressure reducing valve to the heater air intake, and
also be tighen.
3-2.Turning the pressure reducing valve (counterclockwise)
and connect in a gas bottle, and also be tighen with an
adjustable wrench;
-11-
