LDG12
aintenance
M
1.
hange the oil
2. Air cleaner
C
①
②
①
②
①
Please prepare the oil container under the drain plug , use the fork to release
the drain plug, then begin to pull out the oil, when the oil pull over, if necessary,
use the diesel to clean the inside of the cylinder block. In the end lock the drain
plug back.
Open the lock, over the front cover (4.1.
), screw the cylinder head oil cap (2)
as the photo, pull the oil until reach the oil gauge max limited (4.1.
), in the
end screw back the cylinder head stud.
Remove the side plate of the engine, release the clip, unload the lower half part
of the air cleaner, and take out the filter element in the middle; wash the filter
element with diesel fuel and put it back in the air cleaner after it is dry.
Oil cap
Drain plug
Clip
-9-
