LAUNDRY JET Return, Руководство по установке

Страница: 14 / 15

+1.800.867.4580 sales@laundryjet.com www.laundryjet.com
14
Return Unit Installation
5.1 Return Unit Installation
Return Unit Installation
▪
Directly above your return unit, on the ceiling use pipe
drop template to cut hole positions in the ceiling.
▪
Using a stud finder, locate mounting stud position.
Mark Return Unit installation position on the intended
mount wall.
▪
Draw a vertical line down the center of your mount
stud at the elevation of your return unit mount cutout.
The line should be long enough to see in both mount
positions.
▪
Move the unit into position until you can see your
mount line in the mount slots.
▪
Mark your mount hole position for predrill at .25"
(6.5mm) Predrill your mount holes to 3" (76mm)
▪
Using a socket drive on your drill, set the return unit
into position and install the 4 provided 1/4"x 3" Lag
screws.
▪
Connect both pipes to the unit.