LAUNDRY JET Plus, Руководство по установке

Страница: 8 / 33

+1.800.867.4580 sales@laundryjet.com www.laundryjet.com
8
3.1 Pipe Installation Overview
Pipe Installation Standards
Required Piping Installation Standards

All joints must use a minimum entry angle of 45 degrees with a break distance of 18
Inches (460 MM). See Image below.

Pipe cuts must be straight and de burred before seating.

Pipe must be completely seated in fitting connections.

Seal all joints using standard PVC glue.
Connections must be glued around 360 degrees
to ensure maximum system performance.

System must be strapped with “plumbers tape”
(or equivalent) every 6 feet. Port 90 must be
strapped and secured prior to Port installation.

Install Cleanout ports every 50 feet on angled runs. Straight trunk lines can run up
to 100 feet with cleanouts at either end.
Pipe Installation