LAUNCH
X-431 EURO TAB II User Manual
89
There are 2 methods available to reset the tablet:
Method 1
1. Ensure the tablet is in ON mode.
2.
Select “Tablet Setting” on the Home screen.
3.
Select “Backup & reset”.
4.
Tap “Factory data reset”.
5.
Tap “RESET TABLET” to confirm.
Method 2
1. Ensure the tablet is in OFF mode.
2. Hold and press VOLUME - key and POWER key until the tablet enters
system boot mode.
3. Use the / VOLUME - key to switch to system recovery mode and
press POWER key to confirm.
4. Use the / VOLUME -
key to move the highlight bar on “wipe data /
factory reset” and press POWER key to confirm.
5. Press VOLUME + / VOLUME -
to select “yes” and press POWER key to
confirm.
6.
Select “reboot system now” and press POWER key to restart the system.
7. After resetting is complete, follow the on-screen instructions to finish the
system settings.
6. How to activate new VCI device?
*Note: Before registration, please make sure the network is properly connected.
If you have activated a VCI device before and bought a new VCI device due to
the loss or other reasons, please follow the below steps to activate:
1. On the Home screen, t
ap “User Info” -> “Activate VCI”.
2. Input product S/N and activation code, which can be found from the included
password envelope, then tap “Activate”.
3. After activation completed, the tablet will automatically wirelessly connect to
the VCI device. Tap “User Info” -> “VCI” to check if the activated VCI device
is displayed in the connector list or not. Each tablet is allowed to bind multiple
VCI devices. If you intend to use one of the VCI devices to diagnose / test a
