LAUNCH
X-431 EURO TAB II User Manual
41
Fig. 5-17
En
ter the shop name, address line, technician (tap “Add” to create a pull-down
list) and customer name and then tap “OK” to confirm and navigate to the report
details page.
*Note: Alternatively you can also set the workshop information in “User Info” ->
“Settings” -> “Print Information”.
Once you configured the information, it will be automatically generated every time you
saved the diagnostic report. All vehicle and workshop information will be appended as
tags on the diagnostic report.
To ignore the works
hop information, tap “Skip” to go to the report details page.
On the report details page, tap “Save” to save it. All diagnostic reports can be
accessed from “User Info” -> “My Reports” -> “Diagnostic Report”.
Help: Tap to view the help information of the selected DTC item.
Compare Results: Tap to select the pre-repair report to compare. By comparison
of the pre- and post- repair reports, you can easily identify which DTCs are
cleared and which remain unfixed.
*Note: Before performing this function, please make sure that:
•
You have saved a pre-repair report of the currently tested vehicle, and
•
You have already made some repairs and service and cleared the DTCs after the
pre-repair reported is generated. Otherwise, no differences exist between the pre-
and post- repair reports.
