LAUNCH
X-431Diagun User's Manual
35
Note: The registered user could log onto the member area, and click
"product control" to register the newly purchased product. See chapter
“Member login”.
The terms of service are shown on the screen. After reading and fully
understanding, click “I accept” to enter the interface as shown in the figure
below. Product serial number, register password and vendor code are
required.
Fill in Production Information
The serial No is on the X-431Diagun. The register password (should be kept
confidential) is provided in an envelope delivered with the product. The
vendor code is attached on the last page of the user’s manual. After the
information is filled, click "Next step".
Note: