LAUNCH
X-431 Throttle III User Manual
32
function, please be sure the vehicle’s ignition key is in the ON position with the engine off.
Clearing DTCs does not fix the problem(s) that caused the code(s) to be set. If proper
repairs to correct the problem that caused the code(s) to be set are not made, the code(s)
will appear again and the check engine light will illuminate as soon as the problem that
cause the DTC to set manifests itself.
*Note: After clearing, you should retrieve trouble codes once more or turn ignition on and
retrieve codes again. If there are still some trouble codes in the system, please troubleshoot the
code using a factory diagnosis guide, then clear the code and recheck.
D. Read Data Stream
This option lets you view and capture (record) real-time Live Data. This data including
current operating status for parameters and/or sensor information can provide insight on
overall vehicle performance. It can also be used to guide vehicle repair.
*Note: If you must drive the vehicle in order to perform a troubleshooting procedure, ALWAYS
have a second person help you.
Trying to drive and operate the diagnostic tool at the same time
is dangerous, and could cause a serious traffic accident.
Tap
Read Data Stream
, the following screen will appear:
On-screen Buttons:
Select Page:
Tap it to select all items of the current page. To select certain data stream
item, just check the box before the item name.
Select All:
Tap it to select all items.
Unselect:
Tap it to deselect all data stream items.
OK:
Tap it to confirm and jump to the next step.
After selecting the desired items, tap
OK
to enter the data stream reading page.
Содержание 301180833
Страница 75: ...LAUNCH X 431 Throttle III User Manual 69 ...