- 30 -
Press PRINT to store and print weight values and number of weighing (
), see section
PRINTING EXAMPLES
.
If an input is configured as
, closing that input gives you the same functions as if you had
pressed PRINT.
TOTALIZATION NOTES: the weight is only totalized and printed if not 0; if the instrument is metric
the weight has to satisfy metric conditions (stabled weight and equal to at least 20 divisions)
whatever the settings selected.
AUTOMATIC TOTALIZATION: totalization takes place when the weight is stable after a variation; if
a
value has been set, the weight must drop under that value first, then go up again and become
stable; after a number of totalizations equal to what was set in
the number of weighings
and the totalized partial weight will be cleared with the first weighing of a new automatic totalization.
If the
function is enabled the weight remains blocked and is preceded by the letter
; press
PRINT to continue.
Press START to access the following displays:
-
: number of weighing;
-
: totalized partial weight and date of last deletion;
-
: total weight and date of last deletion;
Print of number of weighing, totalized partial weight and total weight
: press PRINT while
displaying total weight or number of weighing.
Deletion of number of weighing and totalized partial weight
: press START while displaying
number of weighing and confirm message
pressing ENTER.
Deletion of number of weighing and totalized partial weight, total weight: press
START while
displaying total weight and confirm message
pressing ENTER.
In totalizer mode you can:
-
set weight to zero for small variations (press
and confirm with ENTER);
-
set semi-automatic tare (press TARE);
To exit totalizer mode and return to standard operations, press START for 3 seconds, the
selected type of totalization appears (
,
,
); press ESC, select the
operating mode and confirm with ENTER.
If no setpoint is enabled,you can return to standard operations also by pressing MENU.
0
