- 1 -
THE INSTRUMENT IS SUPPLYED WITH CALIBRATION: 10000 KG, SENSITIVITY
2mV/V; RESOLUTION =1 . OPERATING MODE SELECTION BY THE INSTALLER.
SELECTING THE OPERATING MODE
Switch off the instrument, then turn on by keeping pressed
and
(at the same time), the
“JOL.4=0” message appears ; you can select the following operating mode by using the arrows :
1 = 4SEt Weight indicator with four alarm thresholds
2 = 2CAr Loading: batching of 2 products (Slow + Cycle end)
3 = 3CAr Loading: batching of 3 products (Cycle end)
4 = 4CAr Loading: batching of 4 products
Then press ENTER to restore the instruments, the selected operating mode appears followed by the
version’s number .
If you press ENTER while “JOL.4=0” is displayed, the “JOL.4 ” message will appear again
and the instrument will be DEACTIVATED.
In case of automatic reset, when the instrument switches on, the “JOL.4” message appears
ad no command is accepted; select the operating mode again.
______________________________________________________________________________
TO BE FILLED OUT BY THE INSTALLER (ALSO THE INSTRUMENT’S LABEL):
4SEt 2CAr 3CAr 4CAr
CELL: ____________________ nU-U: ____________ rISO: ____________ dECP: ______
______________________________________________________________________________