Operation
Elektronik-Systeme Lauer, MAEN971
19
4.3 Important Items Regarding
Software Installation
To carry out a successful re-installation you have to observe the following items:
– Use the supplied operating system CD for the setup.
– After the re-installation, install the chipset driver (from
E:\drivers\Chipset
) be-
fore installing other drivers.
– Install the graphic drivers (from
E:\graphic\operating system
).
– The picture refresh rate has to remain at 60 Hz, as the TFT displays do not
have an electron beam for image formation, and therefore no improvement is
achieved from a higher setting.
– Install the touch screen drivers in accordance with the instructions.
Note:
Higher settings can even seriously damage the graphic board/display.
Note:
To avoid always having to re-start the installation procedure of the operating sys-
tem, we recommend making an image of the new hard disk (using e.g. Norton Ghost,
Drive Image etc.). Then you can always fall back on the operational image, if need-
ed.
Note:
After operating the system for the first time we recommend that you make start
discs (emergency discs). These might be required to restore an operational system.
Additionally, we recommend making backup copies of your own data and applica-
tions.
