Lauda RA 12 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 52

Lauda RA 12 Скачать руководство пользователя страница 30

30 / 52

Alpha

7.10

Standby

StbY

The status “Standby” follows any automatic Shut-Down procedure. To reactivate the standard operation menu, press
the <Enter> button and for example modify the latest Setpoint.



StbY

is displayed.



To switch to menu Setpoint (

SEt

) press <Enter>.

7.11

Safety functions

7.11.1

Safety functions and removal

Your Alpha Thermostat triggers alarms, warnings or errors as appropriate.
All warnings, alarms or errors are shown on the LED display.

Alarms:

Alarms are safety relevant. Components (Pump / Heater / Refrigerating Unit) will be shut down.

Errors:

When an error occurs switch off the device. If the error is always present after switching on the device,
please inform the LAUDA Service (

8.5) or the local service organisation!

Find cause of alarm, warning or error and rectify where necessary. Then press

on the control head in order to re-

move the message.

Warnings may be ignored by pressing

or

on the control head.

S t b Y

«
...
28
29
30
31
32
...
»

Содержание RA 12





















































Отзывы:

Нет отзывов