Lauda PROLINE Kryomats Series, Руководство по эксплуатации

Страница: 53 / 115

Proline Kryomats
YAUE0007 / 2/26/2009
Starting up
53
7.6.3 Setpoint offset operating mode
With this function it is possible to apply an offset value to the temperature provided by the external
temperature probe or a module and then to use it as the setpoint. The bath temperature can, for
example, be operated at -25 °C below the temperature of a reactor, which is being measured by the
external temperature probe.
Command
−
Offset source and Setpoint offset
−
Open the device parameter menu via the
soft key Menu .
−
With the cursor keys continue to
Æ
Control
Æ
Setpoint offset
Æ
Offset
source .
−
Off indicates that the setpoint offset is
currently deactivated.
−
Select the setpoint source with or
and confirm with .
−
Interfaces (e.g. RS232) are only
displayed if a valid setpoint has already
been transmitted.
−
With the cursor keys continue to
Æ
Setpoint offset .
−
The standard value is 0.00°C .
−
Open the left-hand window with .
−
Enter the desired temperature.
−
Accept the change with ,
−
quit the window with without making
changes.
Help Menu End T
set
T
fix
Off
extern Pt100
RS232
Offset source
Setpoint offset
Help Menu Screen T
set
T
fix
6 7 8 9 0
1 2 3 4 5
Input Setpoint offset:
0.
00
Min: -500.00°C Max: 500.00°C
Help Menu End T
set
T
fix
0.00 °C Offset source
Setpoint offset