manualshive.com logo in svg

Lauda Ecoline RE 320, Руководство по эксплуатации

Поделиться
Скачать
Lauda Ecoline RE 320 Скачать руководство пользователя страница 35

Starting up

10.08.99

YACE0060

29

6.4.4.5  Inserting/ deleting of programme segments

1.  From level 0 proceed as described under 6.4.4. When PGM

appears on the display, press the key on the left.

2.  The display shows RUN (or STOP if the programmer had

been started). Scroll with this key until EDIT appears.

3.  The display shows EDIT, press the key.

4.  Segment number is flashing, press the key

 or

− 

Using the keys, select the segment number 

behind

 which

the new segment has to be inserted.

EXAMPLE:

 Section 6.4.4.1.:

A new segment has to be inserted after segment 2.

Select segment 2 with the keys.

− 

With the key forward until NEW appears. The segment

number ”2” behind which the new segment and the

segment temperature are indicated.

− 

Press the key, the display shows NEW as well as the

segment number and temperature of the new segment.

− 

Then jump with the key to segment temperature or segment

time and start input with the key, then

 or

− 

using both keys input the required segment time and

segment temperature, then continue as described below

(step 5-8).

Содержание Ecoline RE 320






































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды