Lauda DLK 10, Руководство по эксплуатации, Страница: 8 / 32

Through flow coolers
6
Safety information
16/03/2018 / YAFE0004
1.2 Other safety notes

Connect the equipment only to an earthed supply socket.

Use suitable hoses.

Protect tubing with hose clips against slipping off. Prevent kinking of tubing!

Check tubing from time to time for possible material fatigue!

Heat transfer tubing and other hot parts must not come into contact with the supply cable!!

During operation of the through flow cooler, hot tempering liquid may penetrate through the hose in
case of hose rupture, thus constituting a danger to persons and material goods.
vapours to be produced. Ensure appropriate ventilation!

When changing the heat transfer liquid from water to liquids for temperatures above 100 °C
carefully remove all traces of water, also from tubing and from the external circuit, otherwise

danger of burns through delayed boiling!

Always pull out the mains plug before cleaning, maintenance or moving the through-flow cooler!

Repairs must only be carried out by properly qualified personnel!

Values for temperature control and indicating accuracy apply under normal conditions according to
DIN 12876. High-frequency electromagnetic fields may under special conditions lead to
unfavourable values. This does not affect safety!
1.3 EU conformity
The device complies with the basic health and safety requirements outline in the
Directives listed below.

Machinery Directive 2006/42/EC

EMC Directive 2014/30/EU
LAUDA DR. R. WOBSER GMBH & CO. KG
– Pfarrstraße 41/43 -
97922 Lauda-Königshofen - Germany

The device does not fall under Pressure Equipment Directive
2014/68/EU because the device is only classified as high as
Category 1 and is covered by the Machinery Directive.

Depending on the heat transfer liquid used and the method of operation it is possible for
irritating