DigiCal DCS 2
16
Handling / Introduction
YAME0017/09.10.03
2.4.6 Analogue output scaling-
c@B
The DCS 2-Measuring instrument contains an analogue output (0-1Volt) for each channel. To get the
optimal resolution and accuracy it is possible to scale the analogue output by limiting the measuring
range.
Press [ENTER/MENUE] to change the measuring range (default_ 0..100). Use the up and down
keys [
] to select
c@B
. Press [ENTER/MENUE] to confirm.
On the left corner of the display appears a small 1, which indicates the selected channel. For
changing the channel use the up and down keys [
] .
Press again [ENTER/MENUE] to confirm. On the display appears
c@0a
.
To change between measuring range upper limit and measuring range lower limit use the up and
down keys [
] .
c@0a
= Lower limit (default 00.00)
c@0D
= Upper limit (default 100.00)
Press [ENTER/MENUE] to confirm. Use the up and down keys [
] to select the number of
digits after decimal point:
cO-
= two decimal digits
cO -
= one decimal digit (decimal point moves one digit to the right)
Press [ENTER/MENUE] to confirm. On the second line of the display appears
Rh^0
. Use the up
and down keys [
] to select the requested range:
Rh^
= reference standard shows a negative measuring value (below 0,00C°)
Rh^0
= reference standard shows a positive measuring value (above 0,00C°)
Press [ENTER/MENUE] to confirm. On the second line of the display appears
Ec /
. Use the up
and down keys [
] to select the requested range:
Ec /
= below 100,00C°
Ec 0
= above 100,00C°
Press [ENTER/MENUE] to confirm. On the display appears
//-//
. For changing the value use
the up key [
] . For stepping to the next number use the down key [
]. If the requested value is
complete then press [ENTER/MENUE] to confirm.
Press [ESC] to return to measuring mode.
For changing the upper measuring range please repeat the above procedure.
☞
The adjustable measuring range limits are corresponding to the selected
measuring size.
DCS 2-menu
Scale
Meas. range °C Analogue
signal
Lower limit
dA1b
00.00
00,00°C 0,00Volt
Upper limit
dA1E
10.00
10,00°C 1,000Volt
