Certus-NX Versa Evaluation Board
5
4
3
Doing More with the Certus-NX Versa Evaluation Board
For more information on the demo, go to www.latticesemi.com/certus-nx-versa. Here,
you can download the demo user guide, the full source code, and other resources. You
can use the Lattice Radiant software to develop and program your own demos.
Powering the Boards & Observing the Demo Program
These jumpers should be closed. The jumper designators are:
JP4,J16(1-2),J18,J19
J20,J21,J22,J23,J24,J25,JP25,JP26,J28,J29,J30,J31,J32, J46, J47(1-2),J48(1-2).
Connect the supplied power adapter to the 12 V DC power input (J35) on the board.
The power indicator LEDs located on low right corner of board should light, indicating
the board is powered normally. These LEDs designators are:
D1,D2,D3,D4, D5,D6,D7,D8,D9,D10,D11,D12,D13,D14,D15,D16,D17.
Configuration of the Certus-NX (U3) from the external memory (U26) will complete
almost immediately. The LED (D29) will be lighted. It indicates Certus-NX (U3)
successfully booted from external SPI flash.
After configuration, the indicator LED (D21) located in the middle of the top of the
board will be lighted.
Installing the software
To develop your own solutions, download and use the Lattice Radiant design software
(version 2.2 or later), download from www.latticesemi.com/radiant.
If you only need to re-program the board, you can use the Radiant Programmer
Standalone software (version 2.2 or later).
Additional Terms and Conditions Applicable to Lattice Programming and Development Hardware
Lattice device programmers, programming cables, socket adapters, and other hardware sold for use in conjunction with Lattice
software (“Programming Hardware”) and Lattice evaluation boards and development kits sold for use in conjunction with
evaluating Lattice products (“Development Hardware”) are designed and intended for use solely with semiconductor components
manufactured by Lattice Semiconductor Corporation. Programming and Development Hardware is warranted to meet Lattice
specifications only for a period of ninety (90) days; in all other respects the terms and conditions of sale of Programming and
Development Hardware shall be Lattice’s standard terms and conditions set forth in Lattice’s Sales Order Acknowledgment.
Additionally, Lattice specifications for Programming and Development Hardware limit their use to low-volume engineering
applications only, and not for volume production use. The warranty for Programming and Development Hardware will not apply to
any Programming or Development Hardware used in production, used with worn or improperly installed hardware, or used with
incompatible systems or components.
Technical Support
Copyright © 2021 Lattice Semiconductor Corporation. Lattice Semiconductor, L (stylized) Lattice Semiconductor Corp., Lattice
(design) are either registered trademarks or trademarks of Lattice Semiconductor Corporation in the United States and/or other
countries. Other product names used in this publication are for identification purposes only and may be trademarks of their
respective companies.
QS055 V1
April 2021
