
VANITY CABINETS
170
|
Latitude - May 2018
VANITY CABINETS
• These vanity cabinets include a factory installed powered 120 V docking
station called ‘Docking Drawer’.
• Top Drawer Front Height: 5 7/8”.
• 3VDOI, 3BHVDOI
- Middle Drawer Front Height: 9 3/8”.
• 3VDWHOI
-
Middle Drawer Front Height: 5 7/8”.
• Bottom Drawer Front Height: 11 13/16”.
• Docking Drawer is a UL approved purpose-built unit providing a safe and
clutter free solution for powering typical vanity devices (up to 20 amps)
such as curling irons and hair dryers.
• 3VDOI, 3BHVDOI
- The Outlet Docking Drawer is factory installed into
the middle drawer.
3VDWHOI
Outlet Docking Drawer is factory installed
into bottom drawer. All that is required on the job site is hardwiring from a
120 V source into the J-box (included) of the Outlet Docking Drawer unit,
which will be out of site, behind the drawer.
• Unit is ETL listed to UL962a & CSA-C22.2 standards.
• Built in circuit breaker.
• Two 120 V GFI AC outlets.
• 3VDOI, 3BHVDOI
- The middle drawer box including the Docking Drawer
unit will be 15” deep instead of standard 18” drawer for 21” deep vanity
cabinets. This provides the clearance needed for the cord management
pivot arm. Pivot arm keeps power chord from binding as drawer is
opened and closed; tested to 500,000 cycles.
3VDWHOI
- Same except bottom drawer box.
• Docking Drawer installed in left corner of drawer. Drawer can be removed
from cabinet by first removing face cover plate.
Outlet Docking Drawer Insert Vanity Cabinet | 3VDOI, 3BHVDOI, 3VDWHOI
24” HIGH
3VDOI15
3VDOI6.5
3VDOI18
24” HIGH
3BHVDOI15
3BHVDOI16.5
3BHVDOI18
24” HIGH
3VDWHOI15
3VDWHOI16.5
3VDWHOI18
• Standard 21” deep three
drawer vanity.
• Middle drawer will be 15”
deep.
• Outlet Docking Drawer
factory installed.
• Standard 21” deep BASE
HEIGHT three drawer
vanity.
• Middle drawer will be 15”
deep.
• Outlet Docking Drawer
factory installed.
• Standard 21” deep WALL
HUNG three drawer vanity.
• Bottom drawer will be 15”
deep.
• Outlet Docking Drawer
factory installed.
• Cover plate is black. Only the black
face plate and re-set button will show
inside the drawer, all other parts are
concealed behind the drawer.
MINIMUM SIZE
No Modifications
MODIFICATIONS AVAILABLE
No Modifications