Lathem PC700, Руководство пользователя

Страница: 29 / 52

Using the PC700 Series Clock
•
25
•
The Administrator Main Menu screen will display.
•
Press Network Setup. The Network Setup screen will
display.
•
If you want to set the clock’s IP address as a “Static” IP turn
off DHCP by pressing the OFF button. The screen will
refresh and more buttons will become active.
•
Press the IP Address button. The IP Address screen will
display.
•
Using the numeric key pad enter the IP address you want to
assign to the clock and press OK.
•
Press the Subnet Mask button. The Subnet Mask screen will
display.
•
Using the numeric key pad enter the address you want to
assign to the clock and press OK.
•
Press the Gateway button. The Default Gateway screen will
display.
•
Using the numeric key pad enter the address you want to
assign to the clock and press OK.
•
When finished press the back

button until you have
returned to the default screen.
Network Setup - WiFi
This option is used to select and connect to a WiFi access point.
•
From the PC700 touchpad press the Admin button. Enter the
administrator password and press Enter.
•
The Administrator Main Menu screen will display.
•
Press Network Setup. The Network Setup screen will
display.
•
Press WiFi. The PC700 will check to see if there are any Wi-
Fi connections within range and display them in a list.
Note:
Make sure the WiFi Enabled is set to Yes .
•
Select the desired Wi-Fi connection from the list.
•
The Enter Passcode screen will display with a keypad.
•
Using the master buttons to select upper case letters, lower
case letters, numbers or symbols enter the passcode for the